Explore topic-wise fullforms in Chemistry

Zinc is a chemical element with the symbol Zn and atomic number 30. Zinc is a slightly brittle metal at room temperature and has a silvery-greyish appearance when oxidation is removed. It is the first element in group 12 (IIB) of the periodic table. In some respects, zinc is chemically similar to magnesium: both elements exhibit only one normal oxidation state (+2), and the Zn2+ and Mg2+ ions are of similar size. Zinc is the 24th most abundant element in Earth's crust and has five stable isotopes. The most common zinc ore is sphalerite (zinc blende), a zinc sulfide mineral. The largest workable lodes are in Australia, Asia, and the United States. Zinc is refined by froth flotation of the ore, roasting, and final extraction using electricity (electrowinning).

Brass, an alloy of copper and zinc in various proportions, was used as early as the third millennium BC in the Aegean area and the region which currently includes Iraq, the United Arab Emirates, Kalmykia, Turkmenistan and Georgia. In the second millennium BC it was used in the regions currently including West India, Uzbekistan, Iran, Syria, Iraq, and Israel. Zinc metal was not produced on a large scale until the 12th century in India, though it was known to the ancient Romans and Greeks. The mines of Rajasthan have given definite evidence of zinc production going back to the 6th century BC. To date, the oldest evidence of pure zinc comes from Zawar, in Rajasthan, as early as the 9th century AD when a distillation process was employed to make pure zinc. Alchemists burned zinc in air to form what they called "philosopher's wool" or "white snow".

The element was probably named by the alchemist Paracelsus after the German word Zinke (prong, tooth). German chemist Andreas Sigismund Marggraf is credited with discovering pure metallic zinc in 1746. Work by Luigi Galvani and Alessandro Volta uncovered the electrochemical properties of zinc by 1800. Corrosion-resistant zinc plating of iron (hot-dip galvanizing) is the major application for zinc. Other applications are in electrical batteries, small non-structural castings, and alloys such as brass. A variety of zinc compounds are commonly used, such as zinc carbonate and zinc gluconate (as dietary supplements), zinc chloride (in deodorants), zinc pyrithione (anti-dandruff shampoos), zinc sulfide (in luminescent paints), and dimethylzinc or diethylzinc in the organic laboratory.

Zinc is an essential mineral, including to prenatal and postnatal development. Zinc deficiency affects about two billion people in the developing world and is associated with many diseases. In children, deficiency causes growth retardation, delayed sexual maturation, infection susceptibility, and diarrhea. Enzymes with a zinc atom in the reactive center are widespread in biochemistry, such as alcohol dehydrogenase in humans. Consumption of excess zinc may cause ataxia, lethargy, and copper deficiency.

INFO: Full form for WGR is Water Gas Ratio in Chemistry category
WGR also has other full forms in other categories mentioned below.

INFO: Full form for VRV is Variable Refrigerant Volume in Chemistry category
VRV also has other full forms in other categories mentioned below.

INFO: Full form for WBGS is Wide Bandgap Semi-conductor in Chemistry category
WBGS also has other full forms in other categories mentioned below.

INFO: Full form for PFZ is Protofluor Z in Chemistry category
PFZ also has other full forms in other categories mentioned below.

The Age of Innocence is a 1920 novel by Edith Wharton.

The Age of Innocence may also refer to:

INFO: Full form for HB is H Bonding in Chemistry category
HB also has other full forms in other categories mentioned below.

INFO: Full form for HB is Hydrogen Bonded in Chemistry category
HB also has other full forms in other categories mentioned below.

A hydrogen bond (or H-bond) is a primarily electrostatic force of attraction between a hydrogen (H) atom which is covalently bound to a more electronegative atom or group, and another electronegative atom bearing a lone pair of electrons—the hydrogen bond acceptor (Ac). Such an interacting system is generally denoted Dn–H···Ac, where the solid line denotes a polar covalent bond, and the dotted or dashed line indicates the hydrogen bond. The most frequent donor and acceptor atoms are the second-row elements nitrogen (N), oxygen (O), and fluorine (F).

Hydrogen bonds can be intermolecular (occurring between separate molecules) or intramolecular (occurring among parts of the same molecule). The energy of a hydrogen bond depends on the geometry, the environment, and the nature of the specific donor and acceptor atoms, and can vary between 1 and 40 kcal/mol. This makes them somewhat stronger than a van der Waals interaction, and weaker than fully covalent or ionic bonds. This type of bond can occur in inorganic molecules such as water and in organic molecules like DNA and proteins. Hydrogen bonds are responsible for holding such materials as paper and felted wool together, and for causing separate sheets of paper to stick together after becoming wet and subsequently drying.

The hydrogen bond is responsible for many of the anomalous physical and chemical properties of compounds of N, O, and F. In particular, intermolecular hydrogen bonding is responsible for the high boiling point of water (100 °C) compared to the other group-16 hydrides that have much weaker hydrogen bonds. Intramolecular hydrogen bonding is partly responsible for the secondary and tertiary structures of proteins and nucleic acids. It also plays an important role in the structure of polymers, both synthetic and natural.

In brewing and winemaking, free amino nitrogen (FAN) is a measure of the concentration of individual amino acids and small peptides (one to three units) which can be utilized by beer and wine yeast for cell growth and proliferation. Together with ammonia, FAN makes up the measurement of yeast assimilable nitrogen that can be measured prior to the start of fermentation.

The exact components of FAN will vary from composition of the wort or grape must. In wine, all 21 amino acids can be found in trace amounts with arginine, proline and glutamine being the most abundant. However, as Saccharomyces cerevisiae, the primary yeast for both beer and wine, can not utilize proline in the anaerobic conditions of ethanol fermentation it is not included in FAN (and subsequently YAN) calculations.

INFO: Full form for BAV is Bio-augmented Anaerobically-degrading Vinyl Chloride in Chemistry category
BAV also has other full forms in other categories mentioned below.

INFO: Full form for ALP is Activating Local Potential in Chemistry category
ALP also has other full forms in other categories mentioned below.

INFO: Full form for RI is Radical Initiator in Chemistry category
RI also has other full forms in other categories mentioned below.

Precomputed Radiance Transfer (PRT) is a computer graphics technique used to render a scene in real time with complex light interactions being precomputed to save time. Radiosity methods can be used to determine the diffuse lighting of the scene, however PRT offers a method to dynamically change the lighting environment.

In essence, PRT computes the illumination of a point as a linear combination of incident irradiance. An efficient method must be used to encode this data, such as spherical harmonics.

When spherical harmonics are used to approximate the light transport function, only low-frequency effects can be handled with a reasonable number of parameters. Ren Ng extended this work to handle higher frequency shadows by replacing spherical harmonics with non-linear wavelets.

Teemu Mäki-Patola gives a clear introduction to the topic based on the work of Peter-Pike Sloan et al. At SIGGRAPH 2005, a detailed course on PRT was given.

INFO: Full form for MW is Magnetized Water in Chemistry category
MW also has other full forms in other categories mentioned below.

The molecular mass (m) is the mass of a given molecule: it is measured in daltons (Da or u). Different molecules of the same compound may have different molecular masses because they contain different isotopes of an element. The related quantity relative molecular mass, as defined by IUPAC, is the ratio of the mass of a molecule to the unified atomic mass unit (also known as the dalton) and is unitless. The molecular mass and relative molecular mass are distinct from but related to the molar mass. The molar mass is defined as the mass of a given substance divided by the amount of a substance and is expressed in g/mol. The molar mass is usually the more appropriate figure when dealing with macroscopic (weigh-able) quantities of a substance.

The definition of molecular weight is most authoritatively synonymous with molecular mass; however, in common practice, it is also highly variable as are the units used in conjunction with it. Many common preparatory sources use g/mol and effectively define it as a synonym of molar mass, while more authoritative sources use Da or u and align its definition more closely with the molecular mass. Even when the molecular weight is used with the units Da or u, it is frequently as a weighted average similar to the molar mass but with different units. In molecular biology, the weight of macromolecules is referred to as their molecular weight and is expressed in kDa, although the numerical value is often approximate and representative of an average.

The terms molecular mass, molecular weight, and molar mass are often used interchangeably in areas of science where distinguishing between them is unhelpful. In other areas of science, the distinction is crucial. The molecular mass is more commonly used when referring to the mass of a single or specific well-defined molecule and less commonly than molecular weight when referring to a weighted average of a sample. Prior to the 2019 redefinition of SI base units quantities expressed in daltons (Da or u) were by definition numerically equivalent to otherwise identical quantities expressed in the units g/mol and were thus strictly numerically interchangeable. After the 20 May 2019 redefinition of units, this relationship is only nearly equivalent.

The molecular mass of small to medium size molecules, measured by mass spectrometry, can be used to determine the composition of elements in the molecule. The molecular masses of macromolecules, such as proteins, can also be determined by mass spectrometry; however, methods based on viscosity and light-scattering are also used to determine molecular mass when crystallographic or mass spectrometric data are not available.

The iodine value (or iodine adsorption value or iodine number or iodine index, commonly abbreviated as IV) in chemistry is the mass of iodine in grams that is consumed by 100 grams of a chemical substance. Iodine numbers are often used to determine the amount of unsaturation in fats, oils and waxes. In fatty acids, unsaturation occurs mainly as double bonds which are very reactive towards halogens, the iodine in this case. Thus, the higher the iodine value, the more unsaturations are present in the fat. It can be seen from the table that coconut oil is very saturated, which means it is good for making soap. On the other hand, linseed oil is highly unsaturated, which makes it a drying oil, well suited for making oil paints.

Darmstadtium is a chemical element with the symbol Ds and atomic number 110. It is an extremely radioactive synthetic element. The most stable known isotope, darmstadtium-281, has a half-life of approximately 12.7 seconds. Darmstadtium was first created in 1994 by the GSI Helmholtz Centre for Heavy Ion Research in the city of Darmstadt, Germany, after which it was named.

In the periodic table, it is a d-block transactinide element. It is a member of the 7th period and is placed in the group 10 elements, although no chemical experiments have yet been carried out to confirm that it behaves as the heavier homologue to platinum in group 10 as the eighth member of the 6d series of transition metals. Darmstadtium is calculated to have similar properties to its lighter homologues, nickel, palladium, and platinum.

INFO: Full form for DS is Discontinuity Sample in Chemistry category
DS also has other full forms in other categories mentioned below.