Explore topic-wise fullforms in Information Technology

In computing, the Challenge-Handshake Authentication Protocol (CHAP) authenticates a user or network host to an authenticating entity. That entity may be, for example, an Internet service provider.

CHAP provides protection against replay attacks by the peer through the use of an incrementally changing identifier and of a variable challenge-value. CHAP requires that both the client and server know the plaintext of the secret, although it is never sent over the network. Thus, CHAP provides better security as compared to Password Authentication Protocol (PAP) which is vulnerable for both these reasons. The MS-CHAP variant does not require either peer to know the plaintext and does not transmit it, but has been broken.

Classless Inter-Domain Routing (CIDR ) is a method for allocating IP addresses and for IP routing. The Internet Engineering Task Force introduced CIDR in 1993 to replace the previous classful network addressing architecture on the Internet. Its goal was to slow the growth of routing tables on routers across the Internet, and to help slow the rapid exhaustion of IPv4 addresses.

IP addresses are described as consisting of two groups of bits in the address: the most significant bits are the network prefix, which identifies a whole network or subnet, and the least significant set forms the host identifier, which specifies a particular interface of a host on that network. This division is used as the basis of traffic routing between IP networks and for address allocation policies.

Whereas classful network design for IPv4 sized the network prefix as one or more 8-bit groups, resulting in the blocks of Class A, B, or C addresses, under CIDR address space is allocated to Internet service providers and end users on any address-bit boundary. In IPv6, however, the interface identifier has a fixed size of 64 bits by convention, and smaller subnets are never allocated to end users.

CIDR encompasses several concepts. It is based on variable-length subnet masking (VLSM) which allows the specification of arbitrary-length prefixes. CIDR introduced a new method of representation for IP addresses, now commonly known as CIDR notation, in which an address or routing prefix is written with a suffix indicating the number of bits of the prefix, such as 192.0.2.0/24 for IPv4, and 2001:db8::/32 for IPv6. CIDR introduced an administrative process of allocating address blocks to organizations based on their actual and short-term projected needs. The aggregation of multiple contiguous prefixes resulted in supernets in the larger Internet, which whenever possible are advertised as aggregates, thus reducing the number of entries in the global routing table.

INFO: Full form for CIFS is Common Internet Filesystem in Information Technology category
CIFS also has other full forms in other categories mentioned below.

INFO: Full form for CJKV is Chinese, Japanese, Korean, and Vietnamese in Information Technology category
CJKV also has other full forms in other categories mentioned below.

Capability Maturity Model Integration (CMMI) is a process level improvement training and appraisal program. Administered by the CMMI Institute, a subsidiary of ISACA, it was developed at Carnegie Mellon University (CMU). It is required by many U.S. Government contracts, especially in software development. CMU claims CMMI can be used to guide process improvement across a project, division, or an entire organization. CMMI defines the following maturity levels for processes: Initial, Managed, Defined, Quantitatively Managed, and Optimizing. Version 2.0 was published in 2018 (Version 1.3 was published in 2010, and is the reference model for the remaining information in this wiki article). CMMI is registered in the U.S. Patent and Trademark Office by CMU.

COBOL (; an acronym for "common business-oriented language") is a compiled English-like computer programming language designed for business use. It is an imperative, procedural and, since 2002, object-oriented language. COBOL is primarily used in business, finance, and administrative systems for companies and governments. COBOL is still widely used in applications deployed on mainframe computers, such as large-scale batch and transaction processing jobs. However, due to its declining popularity and the retirement of experienced COBOL programmers, programs are being migrated to new platforms, rewritten in modern languages or replaced with software packages. Most programming in COBOL is now purely to maintain existing applications; however, many large financial institutions were still developing new systems in COBOL as late as 2006.

COBOL was designed in 1959 by CODASYL and was partly based on the programming language FLOW-MATIC designed by Grace Hopper. It was created as part of a US Department of Defense effort to create a portable programming language for data processing. It was originally seen as a stopgap, but the Department of Defense promptly forced computer manufacturers to provide it, resulting in its widespread adoption. It was standardized in 1968 and has since been revised four times. Expansions include support for structured and object-oriented programming. The current standard is ISO/IEC 1989:2014.

COBOL statements have an English-like syntax, which was designed to be self-documenting and highly readable. However, it is verbose and uses over 300 reserved words. In contrast with modern, succinct syntax like y = x;, COBOL has a more English-like syntax (in this case, MOVE x TO y).COBOL code is split into four divisions (identification, environment, data, and procedure) containing a rigid hierarchy of sections, paragraphs and sentences. Lacking a large standard library, the standard specifies 43 statements, 87 functions and just one class.

Academic computer scientists were generally uninterested in business applications when COBOL was created and were not involved in its design; it was (effectively) designed from the ground up as a computer language for business, with an emphasis on inputs and outputs, whose only data types were numbers and strings of text.COBOL has been criticized throughout its life for its verbosity, design process, and poor support for structured programming. These weaknesses result in monolithic, verbose (intended to be English-like) programs that are not easily comprehensible.

The Common Object Request Broker Architecture (CORBA) is a standard defined by the Object Management Group (OMG) designed to facilitate the communication of systems that are deployed on diverse platforms. CORBA enables collaboration between systems on different operating systems, programming languages, and computing hardware. CORBA uses an object-oriented model although the systems that use the CORBA do not have to be object-oriented. CORBA is an example of the distributed object paradigm.

INFO: Full form for COTS is Commercial Off-The-Shelf in Information Technology category
COTS also has other full forms in other categories mentioned below.

CP/M, originally standing for Control Program/Monitor and later Control Program for Microcomputers, is a mass-market operating system created in 1974 for Intel 8080/85-based microcomputers by Gary Kildall of Digital Research, Inc. Initially confined to single-tasking on 8-bit processors and no more than 64 kilobytes of memory, later versions of CP/M added multi-user variations and were migrated to 16-bit processors.

The combination of CP/M and S-100 bus computers became an early standard in the microcomputer industry. This computer platform was widely used in business through the late 1970s and into the mid-1980s. CP/M increased the market size for both hardware and software by greatly reducing the amount of programming required to install an application on a new manufacturer's computer. An important driver of software innovation was the advent of (comparatively) low-cost microcomputers running CP/M, as independent programmers and hackers bought them and shared their creations in user groups. CP/M was eventually displaced by DOS following the 1981 introduction of the IBM PC.

A binary large object (BLOB) is a collection of binary data stored as a single entity. Blobs are typically images, audio or other multimedia objects, though sometimes binary executable code is stored as a blob. They can exist as persistent values inside some databases, or exist at runtime as program variables in some languages.

Blobs were originally just big amorphous chunks of data invented by Jim Starkey at DEC, who describes them as "the thing that ate Cincinnati, Cleveland, or whatever" from "the 1958 Steve McQueen movie", referring to The Blob. Later, Terry McKiever, a marketing person for Apollo, felt that it needed to be an acronym and invented the backronym Basic Large Object. Then Informix invented an alternative backronym, Binary Large Object.

The data type and definition was introduced to describe data not originally defined in traditional computer database systems, particularly because it was too large to store practically at the time the field of database systems was first being defined in the 1970s and 1980s. The data type became practical when disk space became cheap. This definition gained popularity with IBM's DB2.

The term is used in NoSQL databases, especially in key-value store databases such as Redis. The term is also used by languages that allow runtime manipulation of Blobs, like JavaScript.

The name "blob" is further borrowed by the deep learning software Caffe to represent multi-dimensional arrays.

In the world of free and open-source software, the term is also borrowed to refer to proprietary device drivers, which are distributed without their source code, exclusively through binary code; in such use, the term binary blob is common, even though the first letter in the blob abbreviation already stands for binary.

A blog (a truncation of "weblog") is a discussion or informational website published on the World Wide Web consisting of discrete, often informal diary-style text entries (posts). Posts are typically displayed in reverse chronological order, so that the most recent post appears first, at the top of the web page. Until 2009, blogs were usually the work of a single individual, occasionally of a small group, and often covered a single subject or topic. In the 2010s, "multi-author blogs" (MABs) emerged, featuring the writing of multiple authors and sometimes professionally edited. MABs from newspapers, other media outlets, universities, think tanks, advocacy groups, and similar institutions account for an increasing quantity of blog traffic. The rise of Twitter and other "microblogging" systems helps integrate MABs and single-author blogs into the news media. Blog can also be used as a verb, meaning to maintain or add content to a blog.

The emergence and growth of blogs in the late 1990s coincided with the advent of web publishing tools that facilitated the posting of content by non-technical users who did not have much experience with HTML or computer programming. Previously, a knowledge of such technologies as HTML and File Transfer Protocol had been required to publish content on the Web, and early Web users therefore tended to be hackers and computer enthusiasts. In the 2010s, the majority are interactive Web 2.0 websites, allowing visitors to leave online comments, and it is this interactivity that distinguishes them from other static websites. In that sense, blogging can be seen as a form of social networking service. Indeed, bloggers not only produce content to post on their blogs but also often build social relations with their readers and other bloggers. However, there are high-readership blogs which do not allow comments.

Many blogs provide commentary on a particular subject or topic, ranging from philosophy, religion, and arts to science, politics, and sports. Others function as more personal online diaries or online brand advertising of a particular individual or company. A typical blog combines text, digital images, and links to other blogs, web pages, and other media related to its topic. The ability of readers to leave publicly viewable comments, and interact with other commenters, is an important contribution to the popularity of many blogs. However, blog owners or authors often moderate and filter online comments to remove hate speech or other offensive content. Most blogs are primarily textual, although some focus on art (art blogs), photographs (photoblogs), videos (video blogs or "vlogs"), music (MP3 blogs), and audio (podcasts). In education, blogs can be used as instructional resources; these are referred to as edublogs. Microblogging is another type of blogging, featuring very short posts.

'Blog' and 'blogging' are now loosely used for content creation and sharing on social media, especially when the content is long-form and one creates and shares content on regular basis. So, one could be maintaining a blog on Facebook or blogging on Instagram.

On February 16, 2011, there were over 156 million public blogs in existence.On February 20, 2014, there were around 172 million Tumblr and 75.8 million WordPress blogs in existence worldwide. According to critics and other bloggers, Blogger is the most popular blogging service used today. However, Blogger does not offer public statistics. Technorati lists 1.3 million blogs as of February 22, 2014.

The Berkeley Open Infrastructure for Network Computing (BOINC, pronounced – rhymes with "oink") is an open-source middleware system for volunteer computing and grid computing. Originally developed to support the SETI@home project, it became generalized as a platform for other distributed applications in areas as diverse as mathematics, linguistics, medicine, molecular biology, climatology, environmental science, and astrophysics, among others. BOINC aims to enable researchers to tap into the enormous processing resources of many personal computers around the world.

BOINC development originated with a team based at the Space Sciences Laboratory (SSL) at the University of California, Berkeley and led by David Anderson, who also leads SETI@home. As a high-performance distributed computing platform, BOINC brings together about 137,805 active participants and 791,443 active computers (hosts) worldwide processing on average 41.548 PetaFLOPS as of 17 March 2020 (it would be the fifth largest processing capability in the world compared with an individual supercomputer Supercomputer TOP500 list). The National Science Foundation (NSF) funds BOINC through awards SCI/0221529, SCI/0438443 and SCI/0721124. Guinness World Records ranks BOINC as the largest computing grid in the world.

BOINC code runs on various operating systems, including Microsoft Windows, macOS, Android, Linux and FreeBSD. BOINC is free software released under the terms of the GNU Lesser General Public License (LGPL).

The byte order mark (BOM) is a particular usage of the special Unicode character, U+FEFF BYTE ORDER MARK, whose appearance as a magic number at the start of a text stream can signal several things to a program reading the text:

BOM use is optional. Its presence interferes with the use of UTF-8 by software that does not expect non-ASCII bytes at the start of a file but that could otherwise handle the text stream.

Unicode can be encoded in units of 8-bit, 16-bit, or 32-bit integers. For the 16- and 32-bit representations, a computer receiving text from arbitrary sources needs to know which byte order the integers are encoded in. The BOM is encoded in the same scheme as the rest of the document and becomes a non-character Unicode code point if its bytes are swapped. Hence, the process accessing the text can examine these first few bytes to determine the endianness, without requiring some contract or metadata outside of the text stream itself. Generally the receiving computer will swap the bytes to its own endianness, if necessary, and would no longer need the BOM for processing.

The byte sequence of the BOM differs per Unicode encoding (including ones outside the Unicode standard such as UTF-7, see table below), and none of the sequences is likely to appear at the start of text streams stored in other encodings. Therefore, placing an encoded BOM at the start of a text stream can indicate that the text is Unicode and identify the encoding scheme used. This use of the BOM character is called a "Unicode signature".

Bridge Protocol Data Units (BPDUs) are frames that contain information about the spanning tree protocol (STP). A switch sends BPDUs using a unique source MAC address from its origin port to a multicast address with destination MAC (01:80:C2:00:00:00, or 01:00:0C:CC:CC:CD for Cisco proprietary Per VLAN Spanning Tree).

There are two kinds of BPDUs for 802.1D Spanning Tree:

By default the BPDUs are sent every 2 seconds.

The Common Desktop Environment (CDE) is a desktop environment for Unix and OpenVMS, based on the Motif widget toolkit. It was part of the UNIX 98 Workstation Product Standard, and was for a long time the Unix desktop associated with commercial Unix workstations.

After a long history as proprietary software, CDE was released as free software on August 6, 2012, under the GNU Lesser General Public License, version 2.0 or later. Since its release as free software, CDE has been ported to Linux and BSD derivatives.

Continuous data protection (CDP), also called continuous backup or real-time backup, refers to backup of computer data by automatically saving a copy of every change made to that data, essentially capturing every version of the data that the user saves. In its true form it allows the user or administrator to restore data to any point in time. The technique was patented by British entrepreneur Pete Malcolm in 1989 as "a backup system in which a copy [editor's emphasis] of every change made to a storage medium is recorded as the change occurs [editor's emphasis]."

In an ideal case of continuous data protection, the recovery point objective—"the maximum targeted period in which data (transactions) might be lost from an IT service due to a major incident"—is zero, even though the recovery time objective—"the targeted duration of time and a service level within which a business process must be restored after a disaster (or disruption) in order to avoid unacceptable consequences associated with a break in business continuity"—is not zero. An example of a period in which data transactions might be lost is a major discount chain having card readers at its checkout counters shut down at multiple locations for close to two hours in the month of June 2019.

CDP runs as a service that captures changes to data to a separate storage location. There are multiple methods for capturing continuous live data changes involving different technologies that serve different needs. True CDP-based solutions can provide fine granularities of restorable objects ranging from crash-consistent images to logical objects such as files, mail boxes, messages, and database files and logs. This isn't necessarily true of near-CDP solutions.

CD-R (COMPACT DISC – Recordable) is a digital optical disc storage format. A CD-R disc is a compact disc that can be written once and read arbitrarily many times.

CD-R discs (CD-Rs) are readable by most plain CD readers, i.e., CD readers manufactured prior to the introduction of CD-R. This is an advantage over CD-RW, which can be re-written but cannot be played on many plain CD readers.

CD-RW (Compact Disc-ReWritable) is a digital optical disc storage format introduced in 1997. A CD-RW compact disc (CD-RWs) can be written, read, erased, and re-written.

CD-RWs, as opposed to CDs, require specialized readers that have sensitive laser optics. Consequently, CD-RWs cannot be read in many CD readers built prior to the introduction of CD-RW. CD-ROM drives with a "MultiRead" certification are compatible.

CD-RWs must be erased or blanked before reuse. Erasure methods include full blanking where the entire surface of the disc is erased and fast blanking where only metadata areas, such as PMA, TOC and pregap, are cleared. Fast blanking is quicker and usually sufficient to allow rewriting the disc. Full blanking removes all traces of the previous data, and is often used for confidentiality purposes.

CD-RWs can sustain fewer re-writes compared to other storage media (ca. 1,000 compared up to 100,000). Ideal use is for test discs (e.g. for CD authoring), temporary backups, and as a middle-ground between online and offline storage schemes.

INFO: Full form for CDSA is Common Data Security Architecture in Information Technology category
CDSA also has other full forms in other categories mentioned below.

The Bootstrap Protocol (BOOTP) is a computer networking protocol used in Internet Protocol networks to automatically assign an IP address to network devices from a configuration server. The BOOTP was originally defined in RFC 951.

When a network-connected computer boots-up, its IP-stack broadcasts BOOTP network-messages requesting an IP-address assignment. A BOOTP configuration-server replies to the request by assigning an IP address from a pool of addresses, which is preconfigured by an administrator.

BOOTP is implemented using the User Datagram Protocol (UDP) for transport protocol, port number 67 is used by the (DHCP) server for receiving client-requests and port number 68 is used by the client for receiving (DHCP) server responses. BOOTP operates only on IPv4 networks.

Historically, BOOTP has also been used for Unix-like diskless workstations to obtain the network location of their boot image, in addition to the IP address assignment. Enterprises used it to roll out a pre-configured client (e.g., Windows) installation to newly installed PCs.

Initially requiring the use of a boot floppy disk to establish the initial network connection, manufacturers of network cards later embedded the protocol in the BIOS of the interface cards as well as system boards with on-board network adapters, thus allowing direct network booting.

While some parts of BOOTP have been effectively superseded by the Dynamic Host Configuration Protocol (DHCP), which adds the feature of leases, parts of BOOTP are used to provide service to the DHCP protocol. DHCP servers also provide the legacy BOOTP functionality.

Computational fluid dynamics (CFD) is a branch of fluid mechanics that uses numerical analysis and data structures to analyze and solve problems that involve fluid flows. Computers are used to perform the calculations required to simulate the free-stream flow of the fluid, and the interaction of the fluid (liquids and gases) with surfaces defined by boundary conditions. With high-speed supercomputers, better solutions can be achieved, and are often required to solve the largest and most complex problems. Ongoing research yields software that improves the accuracy and speed of complex simulation scenarios such as transonic or turbulent flows. Initial validation of such software is typically performed using experimental apparatus such as wind tunnels. In addition, previously performed analytical or empirical analysis of a particular problem can be used for comparison. A final validation is often performed using full-scale testing, such as flight tests.

CFD is applied to a wide range of research and engineering problems in many fields of study and industries, including aerodynamics and aerospace analysis, weather simulation, natural science and environmental engineering, industrial system design and analysis, biological engineering, fluid flows and heat transfer, and engine and combustion analysis.

INFO: Full form for CFG is Context-Free Grammar in Information Technology category
CFG also has other full forms in other categories mentioned below.

INFO: Full form for CFG is Control Flow Graph in Information Technology category
CFG also has other full forms in other categories mentioned below.

INFO: Full form for CGT is Computational Graph Theory in Information Technology category
CGT also has other full forms in other categories mentioned below.

java.nio (NIO stands for non-blocking I/O) is a collection of Java programming language APIs that offer features for intensive I/O operations. It was introduced with the J2SE 1.4 release of Java by Sun Microsystems to complement an existing standard I/O. NIO was developed under the Java Community Process as JSR 51. An extension to NIO that offers a new file system API, called NIO.2, was released with Java SE 7 ("Dolphin").

INFO: Full form for BiDi is Bi-Directional in Information Technology category
BiDi also has other full forms in other categories mentioned below.

Binary may refer to:

Border Gateway Protocol (BGP) is a standardized exterior gateway protocol designed to exchange routing and reachability information among autonomous systems (AS) on the Internet. BGP is classified as a path-vector routing protocol, and it makes routing decisions based on paths, network policies, or rule-sets configured by a network administrator.

BGP used for routing within an autonomous system is called Interior Border Gateway Protocol, Internal BGP (iBGP). In contrast, the Internet application of the protocol is called Exterior Border Gateway Protocol, External BGP (eBGP).

BIND () is a suite of software for interacting with the Domain Name System (DNS). Its most prominent component, named (pronounced name-dee: , short for name daemon), performs both of the main DNS server roles, acting as an authoritative name server for DNS zones and as a recursive resolver in the network. As of 2015, it is the most widely used domain name server software, and is the de facto standard on Unix-like operating systems. Also contained in the suite are various administration tools such as nsupdate and dig, and a DNS resolver interface library.

The software was originally designed at the University of California, Berkeley (UCB) in the early 1980s. The name originates as an acronym of Berkeley Internet Name Domain, reflecting the application's use within UCB. The latest version is BIND 9, first released in 2000 and still actively maintained by the Internet Systems Consortium (ISC) with new releases issued several times a year.

Basic Telecommunications Access Method (BTAM) is a low-level programming interface specified by IBM for use on the IBM System/360 for start-stop and binary synchronous telecommunications terminals. Later, IBM specified higher-level interfaces QTAM and TCAM.

BTAM was superseded by VTAM for Systems Network Architecture (SNA) devices. BTAM continued to be supported in later iterations of the system architecture, and IBM finally withdrew support in 2000.

BTAM requires the application program or transaction processing system to handle almost every detail of the protocol. This is harder than using a higher-layer protocol, but it permits interfacing to non-standard devices in non-standard ways.

BINAC (Binary Automatic Computer) was an early electronic computer designed for Northrop Aircraft Company by the Eckert–Mauchly Computer Corporation (EMCC) in 1949. Eckert and Mauchly, though they had started the design of EDVAC at the University of Pennsylvania, chose to leave and start EMCC, the first computer company. BINAC was their first product, the first stored-program computer in the United States; the BINAC is also sometimes claimed to be the world's first commercial digital computer even though it was very limited in scope, never fully functional and always economically unviable.

Bandwidth commonly refers to:

Bandwidth may also refer to:

The bit is the most basic unit of information in computing and digital communications. The name is a contraction of binary digit. The bit represents a logical state with one of two possible values. These values are most commonly represented as either "1" or "0", but other representations such as true/false, yes/no, +/−, or on/off are commonly used.

The correspondence between these values and the physical states of the underlying storage or device is a matter of convention, and different assignments may be used even within the same device or program. It may be physically implemented with a two-state device.

The symbol for the binary digit is either 'bit' per recommendation by the IEC 80000-13:2008 standard, or the lowercase character 'b', as recommended by the IEEE 1541-2002 standard.

A contiguous group of binary digits is commonly called a bit string, a bit vector, or a single-dimensional (or multi-dimensional) bit array.A group of eight binary digits is called one byte, but historically the size of the byte is not strictly defined. Frequently, half, full, double and quadruple words consist of a number of bytes which is a low power of two.

In information theory, one bit is the information entropy of a binary random variable that is 0 or 1 with equal probability, or the information that is gained when the value of such a variable becomes known. As a unit of information, the bit is also known as a shannon, named after Claude E. Shannon.

The byte is a unit of digital information that most commonly consists of eight bits. Historically, the byte was the number of bits used to encode a single character of text in a computer and for this reason it is the smallest addressable unit of memory in many computer architectures. To disambiguate arbitrarily sized bytes from the common 8-bit definition, network protocol documents such as The Internet Protocol (RFC 791) refer to an 8-bit byte as an octet. Those bits in an octet are usually counted with numbering from 0 to 7 or 7 to 0 depending on the bit endianness. The first bit is number 0, making the eighth bit number 7.

The size of the byte has historically been hardware-dependent and no definitive standards existed that mandated the size. Sizes from 1 to 48 bits have been used. The six-bit character code was an often-used implementation in early encoding systems, and computers using six-bit and nine-bit bytes were common in the 1960s. These systems often had memory words of 12, 18, 24, 30, 36, 48, or 60 bits, corresponding to 2, 3, 4, 5, 6, 8, or 10 six-bit bytes. In this era, bit groupings in the instruction stream were often referred to as syllables or slab, before the term byte became common.

The modern de facto standard of eight bits, as documented in ISO/IEC 2382-1:1993, is a convenient power of two permitting the binary-encoded values 0 through 255 for one byte—2 to the power 8 is 256. The international standard IEC 80000-13 codified this common meaning. Many types of applications use information representable in eight or fewer bits and processor designers commonly optimize for this usage. The popularity of major commercial computing architectures has aided in the ubiquitous acceptance of the 8-bit byte. Modern architectures typically use 32- or 64-bit words, built of four or eight bytes, respectively.

The unit symbol for the byte was designated as the upper-case letter B by the International Electrotechnical Commission (IEC) and Institute of Electrical and Electronics Engineers (IEEE). Internationally, the unit octet, symbol o, explicitly defines a sequence of eight bits, eliminating the potential ambiguity of the term "byte".

The Common Public Radio Interface (CPRI) standard defines an interface between Radio Equipment Control (REC) and Radio Equipment (RE). Oftentimes, CPRI links are used to carry data between cell sites and base stations.

The purpose of CPRI is to allow replacement of a copper or coax cable connection between a radio transceiver (used example for mobile-telephone communication and typically located in a tower) and a base station (typically located at the ground nearby), so the connection can be made to a remote and more convenient location. This connection (often referred to as the Fronthaul network) can be a fiber to an installation where multiple remote base stations may be served. This fiber supports multi mode communication and doesn't support single mode communication. The fiber end is connected with the transceiver device called Small form-factor pluggable transceiver.

The companies working to define the specification include EricssonAB, Huawei Technologies Co. Ltd, NEC Corporation and Nokia.

A carriage return, sometimes known as a cartridge return and often shortened to CR, <CR> or return, is a control character or mechanism used to reset a device's position to the beginning of a line of text. It is closely associated with the line feed and newline concepts, although it can be considered separately in its own right.

The Netscape Public License (NPL) is a free software license, the license under which Netscape Communications Corporation originally released Mozilla.

Its most notable feature is that it gives the original developer of Mozilla (Netscape, now a subsidiary of AOL), the right to distribute modifications made by other contributors under whatever terms it desires, including proprietary terms, without granting similar rights to these other contributors in respect to contributions made by the original developer. This allowed the release of the Netscape 6 and later versions as proprietary software.

This asymmetry with respect to rights has led to criticism of the license by many members of the open source and free software movements: the Free Software Foundation acknowledged it as a free-software license but one to be avoided, and the Open Source Initiative either rejected it entirely or was not asked to review it. The FSF adds that it's not possible to combine software obtained under the license with software obtained under the GPL.

The Mozilla Public License version 1.1 is similar (and has limited "file-level copyleft"), but lacks the asymmetry in rights. Time Warner, exercising its rights under the Netscape Public License, and at the request of the Mozilla Foundation, relicensed all code in Mozilla that was under the Netscape Public License (including code by other contributors) to an MPL 1.1/GPL 2.0/LGPL 2.1 tri-license, thus removing the GPL-incompatibility.