Explore topic-wise fullforms in Mobile Technology

Enhanced Data rates for GSM Evolution (EDGE) (also known as Enhanced GPRS (EGPRS), IMT Single Carrier (IMT-SC), or Enhanced Data rates for Global Evolution) is a digital mobile phone technology that allows improved data transmission rates as a backward-compatible extension of GSM. EDGE is considered a pre-3G radio technology and is part of ITU's 3G definition. EDGE was deployed on GSM networks beginning in 2003 – initially by Cingular (now AT&T) in the United States.

EDGE is standardized also by 3GPP as part of the GSM family. A variant, so called Compact-EDGE, was developed for use in a portion of Digital AMPS network spectrum.

Through the introduction of sophisticated methods of coding and transmitting data, EDGE delivers higher bit-rates per radio channel, resulting in a threefold increase in capacity and performance compared with an ordinary GSM/GPRS connection.

EDGE can be used for any packet switched application, such as an Internet connection.

Evolved EDGE continues in Release 7 of the 3GPP standard providing reduced latency and more than doubled performance e.g. to complement High-Speed Packet Access (HSPA). Peak bit-rates of up to 1 Mbit/s and typical bit-rates of 400 kbit/s can be expected.

In telecommunications, Long-Term Evolution (LTE) is a standard for wireless broadband communication for mobile devices and data terminals, based on the GSM/EDGE and UMTS/HSPA technologies. It increases the capacity and speed using a different radio interface together with core network improvements. LTE is the upgrade path for carriers with both GSM/UMTS networks and CDMA2000 networks. The different LTE frequencies and bands used in different countries mean that only multi-band phones are able to use LTE in all countries where it is supported.

The standard is developed by the 3GPP (3rd Generation Partnership Project) and is specified in its Release 8 document series, with minor enhancements described in Release 9. LTE is sometimes known as 3.95G and has been marketed both as "4G LTE" and as "Advanced 4G", but it does not meet the technical criteria of a 4G wireless service, as specified in the 3GPP Release 8 and 9 document series for LTE Advanced. The requirements were originally set forth by the ITU-R organisation in the IMT Advanced specification. However, due to marketing pressures and the significant advancements that WiMAX, Evolved High Speed Packet Access, and LTE bring to the original 3G technologies, ITU later decided that LTE together with the aforementioned technologies can be called 4G technologies. The LTE Advanced standard formally satisfies the ITU-R requirements to be considered IMT-Advanced. To differentiate LTE Advanced and WiMAX-Advanced from current 4G technologies, ITU has defined them as "True 4G".

Unstructured Supplementary Service Data (USSD), sometimes referred to as "quick codes" or "feature codes", is a communications protocol used by GSM cellular telephones to communicate with the mobile network operator's computers. USSD can be used for WAP browsing, prepaid callback service, mobile-money services, location-based content services, menu-based information services, and as part of configuring the phone on the network.

USSD messages are up to 182 alphanumeric characters long. Unlike short message service (SMS) messages, USSD messages create a real-time connection during a USSD session. The connection remains open, allowing a two-way exchange of a sequence of data. This makes USSD more responsive than services that use SMS.

INFO: Full form for DoCoMo is Do Communications Over the Mobile Network in Mobile Technology category

INFO: Full form for MOBILE is Mobile Source Emission Model in Mobile Technology category
MOBILE also has other full forms in other categories mentioned below.

INFO: Full form for SOS is Morse code distress signal in Mobile Technology category
SOS also has other full forms in other categories mentioned below.

A SIM card, also known as subscriber identity module or subscriber identification module (SIM), is an integrated circuit running a card operating system (COS) that is intended to securely store the international mobile subscriber identity (IMSI) number and its related key, which are used to identify and authenticate subscribers on mobile telephony devices (such as mobile phones and computers). It is also possible to store contact information on many SIM cards. SIM cards are always used on GSM phones; for CDMA phones, they are needed only for LTE-capable handsets. SIM cards can also be used in satellite phones, smart watches, computers, or cameras.

The SIM circuit is part of the function of a universal integrated circuit card (UICC) physical smart card, which is usually made of PVC with embedded contacts and semiconductors. SIM cards are transferable between different mobile devices. The first UICC smart cards were the size of credit and bank cards; sizes were reduced several times over the years, usually keeping electrical contacts the same, so that a larger card could be cut down to a smaller size.

A SIM card contains a unique serial number (ICCID), international mobile subscriber identity (IMSI) number, security authentication and ciphering information, temporary information related to the local network, a list of the services the user has access to, and two passwords: a personal identification number (PIN) for ordinary use, and a personal unblocking key (PUK) for PIN unlocking. In Europe, the serial SIM number (SSN) is also sometimes accompanied by an international article number (IAN) or a European article number (EAN) required when registering online for the subscription of a prepaid card.

INFO: Full form for GSM is Global System for Mobile Communications (Groupe Sp in Mobile Technology category
GSM also has other full forms in other categories mentioned below.

General Packet Radio Service (GPRS) is a packet oriented mobile data standard on the 2G and 3G cellular communication network's global system for mobile communications (GSM). GPRS was established by European Telecommunications Standards Institute (ETSI) in response to the earlier CDPD and i-mode packet-switched cellular technologies. It is now maintained by the 3rd Generation Partnership Project (3GPP).

GPRS is typically sold according to the total volume of data transferred during the billing cycle, in contrast with circuit switched data, which is usually billed per minute of connection time, or sometimes by one-third minute increments. Usage above the GPRS bundled data cap may be charged per MB of data, speed limited, or disallowed.

GPRS is a best-effort service, implying variable throughput and latency that depend on the number of other users sharing the service concurrently, as opposed to circuit switching, where a certain quality of service (QoS) is guaranteed during the connection. In 2G systems, GPRS provides data rates of 56–114 kbit/sec. 2G cellular technology combined with GPRS is sometimes described as 2.5G, that is, a technology between the second (2G) and third (3G) generations of mobile telephony. It provides moderate-speed data transfer, by using unused time-division multiple access (TDMA) channels in, for example, the GSM system. GPRS is integrated into GSM Release 97 and newer releases.

A personal communications service (PCS) is set of communications capabilities that provide a combination of terminal mobility, personal mobility, and service profile management. This class of services comprises several types of wireless voice or wireless data communications systems, typically incorporating digital technology, providing services similar to advanced cellular mobile or paging services. In addition, PCS can also be used to provide other wireless communications services, including services that allow people to place and receive communications while away from their home or office, as well as wireless communications to homes, office buildings and other fixed locations. Described in more commercial terms, PCS is a generation of wireless cellular-phone technology, that combines a range of features and services surpassing those available in analogue- and first-generation (2G) digital-cellular phone systems, providing a user with an all-in-one wireless phone, paging, messaging, and data service.

The International Telecommunication Union (ITU) describes personal communications services as a component of the IMT-2000 (3G) standard. PCS and the IMT-2000 standard of which PCS is a part do not specify a particular air interface and channel access method. Wireless service providers may deploy equipment using any of several air interface and channel access methods, as long as the network meets the service description characteristics described in the standard.

In Canada, Mexico, and the United States, PCS are provided in the '1900 MHz' band (specifically 1850–1995 MHz). This frequency band was designated by the United States Federal Communications Commission (FCC) and Industry Canada to be used for new wireless services to alleviate capacity caps inherent in the original Advanced Mobile Phone System (AMPS) and Digital AMPS (D-AMPS) cellular networks in the '850 MHz' band (specifically 814–894 MHz). These frequency bands are particular to North America, and other frequency bands may be designated in other regions.

A switching center is a facility that (a) supports access-independent call control/service control, and connection control (switching) functions, and (b) is responsible for interconnection of access and network systems to support end-to-end services.

Code-division multiple access (CDMA) is a channel access method used by various radio communication technologies. CDMA is an example of multiple access, where several transmitters can send information simultaneously over a single communication channel. This allows several users to share a band of frequencies (see bandwidth). To permit this without undue interference between the users, CDMA employs spread spectrum technology and a special coding scheme (where each transmitter is assigned a code).

CDMA optimizes the use of available bandwidth as it transmits over the entire frequency range and does not limit the user's frequency range.

It is used as the access method in many mobile phone standards. IS-95, also called "cdmaOne", and its 3G evolution CDMA2000, are often simply referred to as "CDMA", but UMTS, the 3G standard used by GSM carriers, also uses "wideband CDMA", or W-CDMA, as well as TD-CDMA and TD-SCDMA, as its radio technologies.

It can be also used as a channel or medium access technology, like ALOHA for example or as a permanent pilot/signalling channel to allow users to synchronize their local oscillators to a common system frequency, thereby also estimating the channel parameters permanently.

In these schemes, the message is modulated on a longer spreading sequence, consisting of several chips (0es and 1es). Due to their very advantegous auto- and crosscorrelation characteristics, these spreading sequences are also used for radar applications since many decades, where they are called Barker-Codes (with a very short sequence length of typically 8 to 32).

For space based communication applications, it is also used since many decades, due to the large pathloss and Doppler-shift caused by the satellite motion. Typically in those applications, neither FDMA nor TDMA is used as a single modulation, due to this effect. CDMA is often used with BPSK in its simplest form, but can be combined with any modulation scheme like in advanced cases QAM or OFDM, which typically makes it very robust and efficient (and equipping them with accurate ranging capabilities, which is difficult without CDMA). Other schemes use subcarriers based on binary offset carrier (BOC), which is inspired by Manchester codes and enable a larger gap between the virtual center frequency and the subcarriers, which is not the case for OFDM subcarriers. Many carriers (such as AT&T and Verizon) will shut down 3G CDMA networks in 2022.

Multimedia Messaging Service (MMS) is a standard way to send messages that include multimedia content to and from a mobile phone over a cellular network. Users and providers may refer to such a message as a PXT, a picture message, or a multimedia message. The MMS standard extends the core SMS (Short Message Service) capability, allowing the exchange of text messages greater than 160 characters in length. Unlike text-only SMS, MMS can deliver a variety of media, including up to forty seconds of video, one image, a slideshow of multiple images, or audio.The first MMS-capable phones were introduced around 2002 in conjunction with the first GSM network. The Sony Ericsson T68i is widely believed to be the first MMS-capable cell phone, while many more hit North American markets beginning in 2004 and 2005.

The most common use involves sending photographs from camera-equipped handsets. Media companies have utilized MMS on a commercial basis as a method of delivering news and entertainment content, and retailers have deployed it as a tool for delivering scannable coupon codes, product images, videos, and other information.

The 3GPP and WAP groups fostered the development of the MMS standard, which is now continued by the Open Mobile Alliance (OMA).

The International Mobile Equipment Identity (IMEI) is a number, usually unique, to identify 3GPP and iDEN mobile phones, as well as some satellite phones. It is usually found printed inside the battery compartment of the phone, but can also be displayed on-screen on most phones by entering *#06# MMI Supplementary Service code on the dialpad, or alongside other system information in the settings menu on smartphone operating systems.

GSM networks use the IMEI number to identify valid devices, and can stop a stolen phone from accessing the network. For example, if a mobile phone is stolen, the owner can have their network provider use the IMEI number to blocklist the phone. This renders the phone useless on that network and sometimes other networks, even if the thief changes the phone's subscriber identity module (SIM).

Devices without a SIM card slot usually don't have the IMEI code. However, the IMEI only identifies the device and has no particular relationship to the subscriber. The phone identifies the subscriber by transmitting the International mobile subscriber identity (IMSI) number, which it stores on a SIM card that can, in theory, be transferred to any handset. However, the network's ability to know a subscriber's current, individual device enables many network and security features.

SMS (Short Message Service) is a text messaging service component of most telephone, Internet, and mobile device systems. It uses standardized communication protocols that let mobile devices exchange short text messages. An intermediary service can facilitate a text-to-voice conversion to be sent to landlines.

SMS, as used on modern devices, originated from radio telegraphy in radio memo pagers that used standardized phone protocols. These were defined in 1986 as part of the Global System for Mobile Communications (GSM) series of standards. The first test SMS message was sent on December 3, 1992, when Neil Papwort, a test engineer for Sema Group, used a personal computer to send "Merry Christmas" to the phone of colleague Richard Jarvis. SMS rolled out commercially on many cellular networks that decade and became hugely popular worldwide as a method of text communication. By the end of 2010, SMS was the most widely used data application, with an estimated 3.5 billion active users, or about 80% of all mobile phone subscribers.

The service allows users to send and receive messages of up to 160 characters (when entirely alpha-numeric) to and from GSM mobiles. Although most SMS messages are sent from one mobile phone to another, support for the service has expanded to include other mobile technologies, such as ANSI CDMA networks and Digital AMPS.

Mobile marketing, a type of direct marketing, uses SMS. According to a 2018 market research report, the global SMS messaging business was estimated to be worth over US$100 billion, accounting for almost 50 percent of all revenue generated by mobile messaging.