Explore topic-wise fullforms in Chemistry

INFO: Full form for RER is Radiation Effects Reactor in Chemistry category
RER also has other full forms in other categories mentioned below.

INFO: Full form for RER is Radiation Effects Report in Chemistry category
RER also has other full forms in other categories mentioned below.

INFO: Full form for EPH is Extractable Petroleum Hydrocarbons in Chemistry category
EPH also has other full forms in other categories mentioned below.

INFO: Full form for ELE is Ester Like Ether in Chemistry category
ELE also has other full forms in other categories mentioned below.

INFO: Full form for TBP is Tertiary-butyl Phosphine in Chemistry category
TBP also has other full forms in other categories mentioned below.

INFO: Full form for TBP is True Boiling Point in Chemistry category
TBP also has other full forms in other categories mentioned below.

INFO: Full form for TFF is Total Fuel Flow in Chemistry category
TFF also has other full forms in other categories mentioned below.

In chemical engineering, biochemical engineering and protein purification, crossflow filtration (also known as tangential flow filtration) is a type of filtration (a particular unit operation). Crossflow filtration is different from dead-end filtration in which the feed is passed through a membrane or bed, the solids being trapped in the filter and the filtrate being released at the other end. Cross-flow filtration gets its name because the majority of the feed flow travels tangentially across the surface of the filter, rather than into the filter. The principal advantage of this is that the filter cake (which can blind the filter) is substantially washed away during the filtration process, increasing the length of time that a filter unit can be operational. It can be a continuous process, unlike batch-wise dead-end filtration.

This type of filtration is typically selected for feeds containing a high proportion of small particle size solids (where the permeate is of most value) because solid material can quickly block (blind) the filter surface with dead-end filtration. Industrial examples of this include the extraction of soluble antibiotics from fermentation liquors.

The main driving force of cross-flow filtration process is transmembrane pressure. Transmembrane pressure is a measure of pressure difference between two sides of the membrane. During the process, the transmembrane pressure might decrease due to an increase of permeate viscosity, therefore filtration efficiency decreases and can be time-consuming for large-scale processes. This can be prevented by diluting permeate or increasing flow rate of the system.

INFO: Full form for SBQ is Styryl Basolium Quaternary in Chemistry category
SBQ also has other full forms in other categories mentioned below.

The rare-earth elements, also called the rare-earth metals or (in context) rare-earth oxides, or the lanthanides (though yttrium and scandium are usually included as rare-earths) are a set of 17 nearly-indistinguishable lustrous silvery-white soft heavy metals. Scandium and yttrium are considered rare-earth elements because they tend to occur in the same ore deposits as the lanthanides and exhibit similar chemical properties, but have different electronic and magnetic properties.

The 1985 International Union of Pure and Applied Chemistry "Red Book" (p. 45) recommends that lanthanoid is used rather than lanthanide. The ending "-ide" normally indicates a negative ion. However, owing to wide current usage, "lanthanide" is still allowed and is roughly analogous to rare earth element.

In pure form, these metals tarnish slowly in air at room temperature, and react slowly with cold water to form hydroxides, liberating hydrogen. They react with steam to form oxides, and at elevated temperature (400 °C) ignite spontaneously and burn with a fierce colorful pyrotechnic flame.

These elements and their compounds have no known biological function. The water-soluble compounds are mildly to moderately toxic, but the insoluble ones are not.

The rare earths have diverse applications in electrical and electronic components, lasers, glass, magnetic materials, and industrial processes, but since they do not occur as base metals or in lump or visible quantities like iron or aluminum, their names and properties are unfamiliar in everyday life. One of the most familiar may be unusually powerful neodymium magnets sold as novelties.

Despite their name, rare-earth elements are relatively plentiful in Earth's crust, with cerium being the 25th most abundant element at 68 parts per million, more abundant than copper. All isotopes of promethium are radioactive, and it does not occur naturally in the earth's crust; however, a trace amount is generated by decay of uranium 238. They are often found in minerals with thorium, and less commonly uranium. Because of their geochemical properties, rare-earth elements are typically dispersed and not often found concentrated in rare-earth minerals. Consequently, economically exploitable ore deposits are sparse (i.e. "rare"). The first rare-earth mineral discovered (1787) was gadolinite, a black mineral composed of cerium, yttrium, iron, silicon, and other elements. This mineral was extracted from a mine in the village of Ytterby in Sweden; four of the rare-earth elements bear names derived from this single location.

According to chemistry professor Andrea Sella, rare-earth elements differ from other elements, insofar that "rare-earth metals, when looked at anatomically, seem to be inseparable from each other, in that they are all almost exactly the same in terms of their chemical properties. However, in terms of their electronic properties, their magnetic properties, each one is really exquisitely unique, and so it can occupy a tiny niche in our technology, where virtually nothing else can." For example, "the rare-earth elements praseodymium (Pr) and neodymium (Nd) can both be embedded inside glass and they completely cut out the glare from the flame when one is doing glass-blowing."

INFO: Full form for SZD is Steel Zinc Dichromate in Chemistry category
SZD also has other full forms in other categories mentioned below.

INFO: Full form for LUZ is Lower Unsaturated Zone in Chemistry category
LUZ also has other full forms in other categories mentioned below.

Dithiothreitol (DTT) is the common name for a small-molecule redox reagent also known as Cleland's reagent. DTT's formula is C4H10O2S2 and the chemical structure of one of its enantiomers in its reduced form is shown on the right; its oxidized form is a disulfide bonded 6-membered ring (shown below). The reagent is commonly used in its racemic form, as both enantiomers are reactive. Its name derives from the four-carbon sugar, threose. DTT has an epimeric ('sister') compound, dithioerythritol (DTE).

INFO: Full form for EAA is Ethylene Acrylic Acid in Chemistry category
EAA also has other full forms in other categories mentioned below.

The Electric Light Orchestra (ELO) are an English rock band formed in Birmingham in 1970 by songwriters-multi-instrumentalists Jeff Lynne and Roy Wood with drummer Bev Bevan. Their music is characterised by a fusion of Beatlesque pop, classical arrangements and futuristic iconography. After Wood's departure in 1972, Lynne became the band's sole leader, arranging and producing every album while writing nearly all of their original material. For their initial tenure, Lynne, Bevan and keyboardist Richard Tandy were the group's only consistent members.

ELO was formed out of Lynne's and Wood's desire to create modern rock and pop songs with classical overtones. It derived as an offshoot of Wood's previous band, the Move, of which Lynne and Bevan were also members. During the 1970s and 1980s, ELO released a string of top 10 albums and singles, including two LPs that reached the top of British charts: the disco-inspired Discovery (1979) and the science-fiction-themed concept album Time (1981). In 1986 Lynne lost interest in the band and disbanded the group. Bevan responded by forming his own band, ELO Part II, which later became the Orchestra. After a brief reunion from 2000 to 2001, ELO remained largely inactive until 2014, when Lynne re-formed the band again with Tandy as Jeff Lynne's ELO.

During ELO's original 13-year period of active recording and touring, they sold over 50 million records worldwide, and collected 19 CRIA, 21 RIAA, and 38 BPI awards. From 1972 to 1986, ELO accumulated 27 top 40 songs on the UK Singles Chart, and fifteen top 20 songs on the US Billboard Hot 100. The band also holds the record for having the most Billboard Hot 100 top 40 hits (20) without a number one single of any band in US chart history. In 2017, the key members of ELO (Wood, Lynne, Bevan and Tandy) were inducted into the Rock and Roll Hall of Fame.

Benzylpiperazine (BZP) is a recreational drug with euphoriant and stimulant properties. The effects produced by BZP are comparable to those produced by amphetamine. Adverse effects have been reported following its use including acute psychosis, renal toxicity and seizures. Deaths from piperazine derivatives are rare, but there has been at least one death apparently due to BZP alone. Its sale is banned in several countries, including Australia, Canada, New Zealand, the United States, the Republic of Ireland, the United Kingdom, Bulgaria, Romania and other parts of Europe.

A carbohydrate () is a biomolecule consisting of carbon (C), hydrogen (H) and oxygen (O) atoms, usually with a hydrogen–oxygen atom ratio of 2:1 (as in water) and thus with the empirical formula Cm(H2O)n (where m may or may not be different from n). However, not all carbohydrates conform to this precise stoichiometric definition (e.g., uronic acids, deoxy-sugars such as fucose), nor are all chemicals that do conform to this definition automatically classified as carbohydrates (e.g. formaldehyde and acetic acid).

The term is most common in biochemistry, where it is a synonym of saccharide, a group that includes sugars, starch, and cellulose. The saccharides are divided into four chemical groups: monosaccharides, disaccharides, oligosaccharides, and polysaccharides. Monosaccharides and disaccharides, the smallest (lower molecular weight) carbohydrates, are commonly referred to as sugars. The word saccharide comes from the Greek word σάκχαρον (sákkharon), meaning "sugar". While the scientific nomenclature of carbohydrates is complex, the names of the monosaccharides and disaccharides very often end in the suffix -ose, which was originally taken from glucose, from Ancient Greek γλεῦκος (gleûkos, “wine, must”), and is used for almost all sugars, e.g. fructose (fruit sugar), sucrose (cane or beet sugar), ribose, amylose, lactose (milk sugar), etc.

Carbohydrates perform numerous roles in living organisms. Polysaccharides serve for the storage of energy (e.g. starch and glycogen) and as structural components (e.g. cellulose in plants and chitin in arthropods). The 5-carbon monosaccharide ribose is an important component of coenzymes (e.g. ATP, FAD and NAD) and the backbone of the genetic molecule known as RNA. The related deoxyribose is a component of DNA. Saccharides and their derivatives include many other important biomolecules that play key roles in the immune system, fertilization, preventing pathogenesis, blood clotting, and development.

Carbohydrates are central to nutrition and are found in a wide variety of natural and processed foods. Starch is a polysaccharide. It is abundant in cereals (wheat, maize, rice), potatoes, and processed food based on cereal flour, such as bread, pizza or pasta. Sugars appear in human diet mainly as table sugar (sucrose, extracted from sugarcane or sugar beets), lactose (abundant in milk), glucose and fructose, both of which occur naturally in honey, many fruits, and some vegetables. Table sugar, milk, or honey are often added to drinks and many prepared foods such as jam, biscuits and cakes.

Cellulose, a polysaccharide found in the cell walls of all plants, is one of the main components of insoluble dietary fiber. Although it is not digestible, insoluble dietary fiber helps to maintain a healthy digestive system by easing defecation. Other polysaccharides contained in dietary fiber include resistant starch and inulin, which feed some bacteria in the microbiota of the large intestine, and are metabolized by these bacteria to yield short-chain fatty acids.

INFO: Full form for CDU is Chemical Dispensing Unit in Chemistry category
CDU also has other full forms in other categories mentioned below.

INFO: Full form for CAW is Catalyst Altered Water in Chemistry category
CAW also has other full forms in other categories mentioned below.

INFO: Full form for BXU is Beta-xylanase Unit in Chemistry category
BXU also has other full forms in other categories mentioned below.

An oxygen sensor (or lambda sensor, where lambda refers to air–fuel equivalence ratio, usually denoted by λ) is an electronic device that measures the proportion of oxygen (O2) in the gas or liquid being analysed.

It was developed by Robert Bosch GmbH during the late 1960s under the supervision of Dr. Günter Bauman. The original sensing element is made with a thimble-shaped zirconia ceramic coated on both the exhaust and reference sides with a thin layer of platinum and comes in both heated and unheated forms. The planar-style sensor entered the market in 1990 and significantly reduced the mass of the ceramic sensing element, as well as incorporating the heater within the ceramic structure. This resulted in a sensor that started sooner and responded faster.

The most common application is to measure the exhaust-gas concentration of oxygen for internal combustion engines in automobiles and other vehicles in order to calculate and, if required, dynamically adjust the air-fuel ratio so that catalytic converters can work optimally, and also determine whether the converter is performing properly or not. An oxygen sensor will typically generate up to about 0.9 volt when the fuel mixture is rich and there is little unburned oxygen in the exhaust.

Scientists use oxygen sensors to measure respiration or production of oxygen and use a different approach. Oxygen sensors are used in oxygen analyzers, which find extensive use in medical applications such as anesthesia monitors, respirators and oxygen concentrators.

Divers use oxygen sensors (and often call them ppO2 sensors) to measure the partial pressure of oxygen in their breathing gas. Open circuit scuba divers test the gas before diving as the mixture remains unchanged during the dive and partial pressure changes due to pressure are simply predictable, while mixed gas rebreather divers must monitor the partial pressure of oxygen in the breathing loop throughout the dive, as it changes and must be controlled to stay within acceptable bounds.

Oxygen sensors are also used in hypoxic air fire prevention systems to continuously monitor the oxygen concentration inside the protected volumes.

There are many different ways of measuring oxygen. These include technologies such as zirconia, electrochemical (also known as galvanic), infrared, ultrasonic, paramagnetic, and very recently, laser methods.

AP5 (also known as APV, (2R)-amino-5-phosphonovaleric acid, or (2R)-amino-5-phosphonopentanoate) is a chemical compound used as a biochemical tool to study various cellular processes. It is a selective NMDA receptor antagonist that competitively inhibits the ligand (glutamate) binding site of NMDA receptors. AP5 blocks NMDA receptors in micromolar concentrations (~50 μM).

AP5 blocks the cellular analog of classical conditioning in the sea slug Aplysia californica, and has similar effects on Aplysia long-term potentiation (LTP), since NMDA receptors are required for both. It is sometimes used in conjunction with the calcium chelator BAPTA to determine whether NMDARs are required for a particular cellular process. AP5/APV has also been used to study NMDAR-dependent LTP in the mammalian hippocampus.

In general, AP5 is very fast-acting within in vitro preparations, and can block NMDA receptor action at a reasonably small concentration. The active isomer of AP5 is considered to be the D configuration, although many preparations are available as a racemic mixture of D- and L-isomers. It is useful to isolate the action of other glutamate receptors in the brain, i.e., AMPA and kainate receptors.

AP5 can block the conversion of a silent synapse to an active one, since this conversion is NMDA receptor-dependent.

INFO: Full form for AHF is Anhydrous Hydrogen Fluoride in Chemistry category
AHF also has other full forms in other categories mentioned below.

The Kjeldahl method or Kjeldahl digestion (Danish pronunciation: [ˈkʰelˌtɛˀl]) in analytical chemistry is a method for the quantitative determination of nitrogen contained in organic substances plus the nitrogen contained in the inorganic compounds ammonia and ammonium (NH3/NH4+). Without modification, other forms of inorganic nitrogen, for instance nitrate, are not included in this measurement. Using an empirical relation between Kjeldahl nitrogen content and protein content it is an important method for analyzing proteins. This method was developed by Johan Kjeldahl in 1883.

INFO: Full form for SEV is Several in Chemistry category
SEV also has other full forms in other categories mentioned below.

INFO: Full form for SFA is Segregated Flow Analysis in Chemistry category
SFA also has other full forms in other categories mentioned below.

INFO: Full form for PTG is Pressure Time Governor in Chemistry category
PTG also has other full forms in other categories mentioned below.

INFO: Full form for PSR is Pressure State Response in Chemistry category
PSR also has other full forms in other categories mentioned below.

INFO: Full form for PMN is Lead-magnesium-niobium (pb-mg-nb) in Chemistry category
PMN also has other full forms in other categories mentioned below.

INFO: Full form for ORR is Oxidation- Reduction Reaction in Chemistry category
ORR also has other full forms in other categories mentioned below.

A valve is a device or natural object that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latin valva, the moving part of a door, in turn from volvere, to turn, roll.

The simplest, and very ancient, valve is simply a freely hinged flap which swings down to obstruct fluid (gas or liquid) flow in one direction, but is pushed up by the flow itself when the flow is moving in the opposite direction. This is called a check valve, as it prevents or "checks" the flow in one direction. Modern control valves may regulate pressure or flow downstream and operate on sophisticated automation systems.

Valves have many uses, including controlling water for irrigation, industrial uses for controlling processes, residential uses such as on/off and pressure control to dish and clothes washers and taps in the home. Even aerosol spray cans have a tiny valve built in. Valves are also used in the military and transport sectors. In HVAC ductwork and other near-atmospheric air flows, valves are instead called dampers. In compressed air systems, however, valves are used with the most common type being ball valves.

INFO: Full form for PBE is Perdew-burke-ernzerhof in Chemistry category
PBE also has other full forms in other categories mentioned below.

INFO: Full form for PCU is Platinum-cobalt Unit in Chemistry category
PCU also has other full forms in other categories mentioned below.

INFO: Full form for PAA is Polyacrylic Acid in Chemistry category
PAA also has other full forms in other categories mentioned below.

INFO: Full form for PAA is Phosphoric Acid Anodized in Chemistry category
PAA also has other full forms in other categories mentioned below.

Total Base Number (TBN) is a measurement of basicity that is expressed in terms of klk number of milligrams of potassium hydroxide per gram of oil sample (mg KOH/g). TBN is an important measurement in petroleum products, and the value varies depending on its application. TBN generally ranges from 6–8 mg KOH/g in modern lubricants, 7–10 mg KOH/g for general internal combustion engine use and 10–15 mg KOH/g for diesel engine operations. TBN is typically higher for marine grade lubricants, approximately 15-80 mg KOH/g, as the higher TBN values are designed to increase the operating period under harsh operating conditions, before the lubricant requires replacement.

INFO: Full form for SSZ is Studies of The Synthesis of Zeolite in Chemistry category
SSZ also has other full forms in other categories mentioned below.

INFO: Full form for SXS is Sodium Xylene Sulfonate in Chemistry category
SXS also has other full forms in other categories mentioned below.

INFO: Full form for VLE is Vapor Liquid Equilibrium in Chemistry category
VLE also has other full forms in other categories mentioned below.

INFO: Full form for ULG is Universal Liquid Gas in Chemistry category
ULG also has other full forms in other categories mentioned below.

INFO: Full form for LGB is Lotte Gas Boiler in Chemistry category
LGB also has other full forms in other categories mentioned below.

INFO: Full form for NRD is Negative Resist Developer in Chemistry category
NRD also has other full forms in other categories mentioned below.

INFO: Full form for RNT is Residual Nitrogen Time in Chemistry category
RNT also has other full forms in other categories mentioned below.

The Scoville scale is a measurement of the pungency (spiciness or "heat") of chili peppers, as recorded in Scoville Heat Units (SHU), based on the concentration of capsaicinoids, among which capsaicin is the predominant component. The scale is named after its creator, American pharmacist Wilbur Scoville, whose 1912 method is known as the Scoville organoleptic test. The Scoville organoleptic test is the most practical method for estimating SHU and is a subjective assessment derived from the capsaicinoid sensitivity by people experienced with eating hot chilis.

An alternative method, using high-performance liquid chromatography (HPLC), can be used to analytically quantify the capsaicinoid content as an indicator of pungency. As of 2011, the subjective organoleptic test has been largely superseded by analytical methods such as HPLC.

INFO: Full form for PSV is Pressure Safety Valve in Chemistry category
PSV also has other full forms in other categories mentioned below.

Water (H
2O) is a polar inorganic compound that is at room temperature a tasteless and odorless liquid, which is nearly colorless apart from an inherent hint of blue. It is by far the most studied chemical compound and is described as the "universal solvent" and the "solvent of life." It is the most abundant substance on the surface of Earth and the only common substance to exist as a solid, liquid, and gas on Earth's surface. It is also the third most abundant molecule in the universe (behind molecular hydrogen and carbon monoxide).

Water molecules form hydrogen bonds with each other and are strongly polar. This polarity allows it to dissociate ions in salts and bond to other polar substances such as alcohols and acids, thus dissolving them. Its hydrogen bonding causes its many unique properties, such as having a solid form less dense than its liquid form, a relatively high boiling point of 100 °C for its molar mass, and a high heat capacity.

Water is amphoteric, meaning that it can exhibit properties of an acid or a base, depending on the pH of the solution that it is in; it readily produces both H+
and OH−
ions. Related to its amphoteric character, it undergoes self-ionization. The product of the activities, or approximately, the concentrations of H+
and OH−
is a constant, so their respective concentrations are inversely proportional to each other.

INFO: Full form for KCN is Potassium Cyanide in Chemistry category
KCN also has other full forms in other categories mentioned below.

Plant hormones (or phytohormones) are signal molecules, produced within plants, that occur in extremely low concentrations. Plant hormones control all aspects of plant growth and development, from embryogenesis, the regulation of organ size, pathogen defense, stress tolerance and through to reproductive development. Unlike in animals (in which hormone production is restricted to specialized glands) each plant cell is capable of producing hormones. Went and Thimann coined the term "phytohormone" and used it in the title of their 1937 book.

Phytohormones occur across the plant kingdom, and even in algae, where they have similar functions to those seen in higher plants. Some phytohormones also occur in microorganisms, such as unicellular fungi and bacteria, however in these cases they do not play a hormonal role and can better be regarded as secondary metabolites.

The kinetic theory of gases is a simple, historically significant classical model of the thermodynamic behavior of gases, with which many principal concepts of thermodynamics were established. The model describes a gas as a large number of identical submicroscopic particles (atoms or molecules), all of which are in constant, rapid, random motion. Their size is assumed to be much smaller than the average distance between the particles. The particles undergo random elastic collisions between themselves and with the enclosing walls of the container. The basic version of the model describes the ideal gas, and considers no other interactions between the particles.

The kinetic theory of gases explains the macroscopic properties of gases, such as volume, pressure, and temperature, as well as transport properties such as viscosity, thermal conductivity and mass diffusivity. The model also accounts for related phenomena, such as Brownian motion.

The equilibrium constant of a chemical reaction is the value of its reaction quotient at chemical equilibrium, a state approached by a dynamic chemical system after sufficient time has elapsed at which its composition has no measurable tendency towards further change. For a given set of reaction conditions, the equilibrium constant is independent of the initial analytical concentrations of the reactant and product species in the mixture. Thus, given the initial composition of a system, known equilibrium constant values can be used to determine the composition of the system at equilibrium. However, reaction parameters like temperature, solvent, and ionic strength may all influence the value of the equilibrium constant.

A knowledge of equilibrium constants is essential for the understanding of many chemical systems, as well as biochemical processes such as oxygen transport by hemoglobin in blood and acid–base homeostasis in the human body.

Stability constants, formation constants, binding constants, association constants and dissociation constants are all types of equilibrium constants.