Explore topic-wise fullforms in Electronics

INFO: Full form for MBSE is Model-based Systems Engineering in Electronics category
MBSE also has other full forms in other categories mentioned below.

INFO: Full form for RSU is Radio Shack Unlimited in Electronics category
RSU also has other full forms in other categories mentioned below.

INFO: Full form for RSU is Rate Sensor Unit in Electronics category
RSU also has other full forms in other categories mentioned below.

INFO: Full form for MRC is Mixed Refrigerant Cycle in Electronics category
MRC also has other full forms in other categories mentioned below.

The characteristic impedance or surge impedance (usually written Z0) of a uniform transmission line is the ratio of the amplitudes of voltage and current of a single wave propagating along the line; that is, a wave travelling in one direction in the absence of reflections in the other direction. Alternatively, and equivalently, it can be defined as the input impedance of a transmission line when its length is infinite. Characteristic impedance is determined by the geometry and materials of the transmission line and, for a uniform line, is not dependent on its length. The SI unit of characteristic impedance is the ohm.

The characteristic impedance of a lossless transmission line is purely real, with no reactive component. Energy supplied by a source at one end of such a line is transmitted through the line without being dissipated in the line itself. A transmission line of finite length (lossless or lossy) that is terminated at one end with an impedance equal to the characteristic impedance appears to the source like an infinitely long transmission line and produces no reflections.

INFO: Full form for DCI is Direct Coupled Interface in Electronics category
DCI also has other full forms in other categories mentioned below.

INFO: Full form for DCI is Distributed Control Instrumentation in Electronics category
DCI also has other full forms in other categories mentioned below.

INFO: Full form for NIS is Normal Insulating and Superconducting in Electronics category
NIS also has other full forms in other categories mentioned below.

INFO: Full form for RCI is Remote Control Interface in Electronics category
RCI also has other full forms in other categories mentioned below.

INFO: Full form for HPL is High Performance Logic in Electronics category
HPL also has other full forms in other categories mentioned below.

Infrared spectroscopy (IR spectroscopy or vibrational spectroscopy) is the measurement of the interaction of infrared radiation with matter by absorption, emission, or reflection. It is used to study and identify chemical substances or functional groups in solid, liquid, or gaseous forms. The method or technique of infrared spectroscopy is conducted with an instrument called an infrared spectrometer (or spectrophotometer) which produces an infrared spectrum. An IR spectrum can be visualized in a graph of infrared light absorbance (or transmittance) on the vertical axis vs. frequency or wavelength on the horizontal axis. Typical units of frequency used in IR spectra are reciprocal centimeters (sometimes called wave numbers), with the symbol cm−1. Units of IR wavelength are commonly given in micrometers (formerly called "microns"), symbol μm, which are related to wave numbers in a reciprocal way. A common laboratory instrument that uses this technique is a Fourier transform infrared (FTIR) spectrometer. Two-dimensional IR is also possible as discussed below.

The infrared portion of the electromagnetic spectrum is usually divided into three regions; the near-, mid- and far- infrared, named for their relation to the visible spectrum. The higher-energy near-IR, approximately 14,000–4,000 cm−1 (0.7–2.5 μm wavelength) can excite overtone or combination modes of molecular vibrations. The mid-infrared, approximately 4,000–400 cm−1 (2.5–25 μm) is generally used to study the fundamental vibrations and associated rotational–vibrational structure. The far-infrared, approximately 400–10 cm−1 (25–1,000 μm) has low energy and may be used for rotational spectroscopy and low frequency vibrations. The region from 2–130 cm−1, bordering the microwave region, is considered the terahertz region and may probe intermolecular vibrations. The names and classifications of these subregions are conventions, and are only loosely based on the relative molecular or electromagnetic properties.

CES (formerly an initialism for Consumer Electronics Show) is an annual trade show organized by the Consumer Technology Association (CTA). Held in January at the Las Vegas Convention Center in Winchester, Nevada, United States, the event typically hosts presentations of new products and technologies in the consumer electronics industry.

INFO: Full form for DRI is Dynamic Range Increase in Electronics category
DRI also has other full forms in other categories mentioned below.

INFO: Full form for CAB is Competitive Analysis Benchmarking in Electronics category
CAB also has other full forms in other categories mentioned below.

INFO: Full form for LIC is Linear Integrated Circuit in Electronics category
LIC also has other full forms in other categories mentioned below.

INFO: Full form for DRT is Defect Review Tool in Electronics category
DRT also has other full forms in other categories mentioned below.

INFO: Full form for CIP is Cascade Improvement Program in Electronics category
CIP also has other full forms in other categories mentioned below.

INFO: Full form for CIP is Continuous Improvement Program in Electronics category
CIP also has other full forms in other categories mentioned below.